jmrp.io / kleidos

0

[READ-ONLY] Mirror of https://github.com/jmrplens/kleidos. Kleidos — Hardware BLE password manager for ESP32-S3 (M5StickC Plus2, StickS3, M5Stack Gray, T-Deck, Cardputer) jmrplens.github.io/kleidos/

0

kleidos / docs / hardware / cad-sources /

at main 10 folders 3 files

José M. Requena Plens Photo-verify device fronts and correct screen and button measurements 2mo ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

m5stack-core2-v13

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

Add device front SVG reconstruction baseline

4 months ago

Fix markdownlint debt, reconcile audit event names, fix BLE doc errors A. Markdownlint: 69 -> 0 errors fleet-wide. - Auto-fixed MD022/MD032/MD040 in docs/ui/components.md and others. - Manual fixes: MD036 bold-as-heading in 0001-i18n-packed-string-pool.md (-> ### Gained / ### Paid / watch out for); MD060 aligned table in docs/architectural_decisions/README.md; MD051 double-hyphen fragments for em-dash and slash headings in code-style-guide.md ToC; MD040 on 4 bare fenced blocks in code-style-guide.md (-> text). - Disabled MD060 globally (.markdownlint.json) -- cad-sources table uses emoji cells that preclude deterministic pipe alignment; rule not in any pre-commit hook. B. Audit-event reconciliation: docs/security/audit-log.md now labels its table as C++ enum symbols and cross-references the API display strings (added column). docs/api-reference.md GET /api/audit now labels its strings as portal display strings and cross-references the enum (added column). Source-verified against src/vault/audit_log.h:23-30 and src/web/admin_portal.cpp:746-747. C. BLE doc fixes: - eviction::armPrompt() call site corrected from BleHidManager::eviction to eviction (namespace alias, src/ble/ble_hid_manager.cpp:59). - sm_sec_lvl=3 row clarified: NimBLE constant 3 + sm_sc_only=1 yields BT SMP Security Mode 1 Level 4 (authenticated LE Secure Connections), per src/ble/stack/nimble_host_raw.cpp:464-469 comments. D/E. Terminology and canonical-fact fixes: - QA_CHECKLIST.md: lockout threshold 3 -> 4 (kShortLockStart=4). - architecture.md: NimBLEDevice::deinit(true) -> nimble_port_stop()/ nimble_port_deinit() (actual raw C API). - code-style-guide.md: wifi_admin_portal.cpp -> admin_portal.cpp. - ota-and-boot.md: NimBLEDevice::deinit -> nimble_port_deinit in grep instruction. - ui/tokens.md: remove present-tense LVGL/LvglTheme.h claim (retired). - ui/fonts.md: T-Deck row no longer lists LVGL Montserrat (retired); fix "T-Deck LVGL build" phrase. - ui/components.md: lvgl_popup_adapter claim removed (file does not exist; LVGL retired fleet-wide). - design/font-integration.md: "non-LVGL boards" -> retirement note. Claude-Session: https://claude.ai/code/session_01Y7Cy1HetRp6TZAUAeekN8X

2 months ago

fronts-contact-sheet.svg

Photo-verify device fronts and correct screen and button measurements Overlay-check every front.svg against real device photos (owner photos for sticks3/cores3-se/coreink/cardputer-adv/tdeck-plus, repo reference photos for the rest) and correct the generator geometry: datasheet-true active areas everywhere (Gray's LCD was drawn square), CoreS3 SE / Core2 Power and Reset moved to the owner-measured left-edge/bottom-edge spots, Core2 touch dots at x 12/25/38.5 y 45, Gray's single Power/Reset at 13 mm on the left edge, all Stick screens at 4-5 mm below the case top, CoreInk confirmed with no front dial (jog wheel on the right edge), T-Deck chevrons pointing inward at the centered trackball, Plus2 BtnA unified with Plus1's press-point geometry (identical chassis). Reconcile measurements.json with the photo evidence (CoreInk origin_y, Core2 origin_y, T-Deck converted to a case-top vertical datum) and drop the obsolete non-Plus tdeck from the generator registry. Claude-Session: https://claude.ai/code/session_01SV58JXhfxhhc9DC6vdjBo4

2 months ago

README.md

CAD sources — working area#

Temporary working area to collect official CAD, datasheets, schematics, and photos for every Kleidos target device, plus the normalized measurements.json and the SVG outputs derived from them.

See _shared/schema.md for the canonical schema.

Status (2026-05-26 — second pass: GrabCAD harvested via browser MCP)#

Legend: ✅ obtained, ⚠️ proxy from related SKU, ❌ missing.

Device	Sources doc	3D model (STEP/STL)	Schematic	Dim drawing	measurements.json	SVG
M5StickC Plus 1.1	✅	✅ STL (M5_Hardware) + STEP (GrabCAD/Germán)	❌	✅ JPG (docs.m5stack)	☐	☐
M5StickC Plus2	✅	✅ same case as Plus1 (Germán STEP)	✅ PDF v0.5	✅ JPG (shared w/ Plus1)	☐	☐
M5StickC Plus S3	✅	⚠️ same family as Plus1/Plus2 (24×48×15)	❌	✅ K150 PDF (user)	☐	☐
M5Stack Gray	✅	✅ STL+OBJ (Basic v2.7) + STEP (Core1)	✅ PDF	❌	☐	☐
M5Stack Core2 v1.3	✅	⚠️ STL Core2 v1.1 proxy	✅ PDF (2025-11)	✅ K010-V13 PDF (user)	☐	☐
M5Stack CoreS3 SE	✅	⚠️ STL CoreS3-Lite proxy	✅ PDF v1.0	✅ Lite PDF (user)	☐	☐
M5Stack CoreInk	✅	❌	✅ PDF	✅ PNG (user)	☐	☐
M5Stack Cardputer	✅	✅ STEP ADV v2 + STEP kit (GrabCAD)	—	—	☐	☐
LilyGO T-Deck Plus	✅	✅ STEP shell + STEP PCB + DXF	✅ GPS+base	✅ DXF outline	☐	☐
LilyGO T-Deck	✅	✅ STEP shell + STEP PCB + DXF	✅	✅ DXF outline	☐	☐

All 10 device variants now have at minimum schematic + photo + either STEP or dimension drawing. Plus2 confirmed dimensionally identical to Plus1 (carcasa común; sólo cambia el interior).

Confirmed bounding boxes (STL/STEP extraction)#

Device	Source file	W × H × D (mm)
StickC Plus	GrabCAD `M5StickC Plus.step` (Germán M.)	48.1 × 24.1 × 13.7
StickC orig	GrabCAD `M5StickC.step`	48.2 × 25.4 × 13.7
StickS3	M5Stack K150 PDF (user)	24 × 48 × 15 (R3)
Gray (shell)	GrabCAD `M5Stack_v4.step`	54.0 × 54.0 × 12.4
Gray (full)	M5_Hardware Basic v2.7 OBJ+STL	54 × 54 × 16.89
Core2 v1.3	M5Stack K010-V13 PDF (user)	54 × 54 × 16.5 (R5)
CoreS3 SE	M5Stack PDF (user)	54 × 54 × 16.5 (R5)
CoreInk	M5Stack dimension render	40 × 56 × 16
Cardputer ADV	GrabCAD `Cardputer_ADV_v2.step`	84.0 × 54.0 × 19.6
Cardputer kit	GrabCAD `Cardputer.stp` (M5Stamp)	84.0 × 54.0 × 19.7
T-Deck Plus	LilyGO `T-Deck-Plus-Shell.stp`	73.14 × 114.98 × 20.40
T-Deck (orig)	LilyGO `T-Deck-Shell.stp`	73.02 × 114.98 × 20.40

Detailed bounding-box JSON: _shared/bounding-boxes.json

Per-device workflow#

Populate sources.md with every URL we evaluate (kept = ✓, rejected = ✗).
Download authoritative files into raw/ (PDFs, STEP, photos).
Extract cotas → measurements.json (schema in _shared/schema.md).
Generate svg/front.svg and side views; validate by overlaying on a real photo at the same scale.

Tooling notes#

STEP inspection: cascadio.step_to_glb() + trimesh for bounding boxes; freecad/cadquery for headless orthographic renders.
PDF measurement: open in Inkscape, set scale to 1:1, use the measure tool.
Photo-based fallback: use USB-C port (8.94 × 3.26 mm) as a known reference.
GrabCAD download via authenticated browser session — credentials in .env.